• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. keith@cooglerconstruction

    ROLLER DRUM WILL NOT TURN

    Now also has a error 14 code also
  2. keith@cooglerconstruction

    ROLLER DRUM WILL NOT TURN

    2012 Hamm roller / compactor 3412 HT Serial Number H1802058 Roller drum will not turn, wheels will turn acts like the drum is locked down. If anyone has any information, it would be helpful. All the fluid are at the correct level as far as hydraulic fluid goes. There is an error 180. that...
  3. keith@cooglerconstruction

    2014 Bomag MPH600

    We found another number stamped into the machine which maybe a serial number 101 590 30 1005 If possible at least is there a way to find out who the manufacture is for the drum roller if not Bomag. Then I could try and contact them directly.
  4. keith@cooglerconstruction

    2014 Bomag MPH600

    That serial number came from the plate in the cab with those numbers here is another number that i found also 101590301055
  5. keith@cooglerconstruction

    2014 Cat RM250 Reclaimer

    Filters were replaced old filters were cut open clean and no metal found inside still having same issue only going to 4000 psi not any higher which should be 6700 psi. Any other suggestions?
  6. keith@cooglerconstruction

    2014 Bomag MPH600

    2014 Bomag MPH 600 Serial # 1015900860000014 Having a problem with noise on the left side of the milling drum, hydraulic pressure was correct and left side motor was removed and checked for possible, bad bearing or motor issue none found motor was taken apart by a hydraulic shop and good as...
  7. keith@cooglerconstruction

    2014 Cat RM250 Reclaimer

    The instruction did help to get pressures up, but it maxed out at 4000 psi, and it stated it needed to be at 6700 +- 200- and 4-wheel drive is still not working at 4000 psi. Still at a loss of what the problem could be and why it will not reach the amount of 6700 psi. Wheel are not even trying...
  8. keith@cooglerconstruction

    2014 Cat RM250 Reclaimer

    Serial Number AWG00399 Cat RM250 Reclaimer Can anyone tell me what the PSI pressures should be on the main pump for the 4 wheel drive forward and reverse test ports. 4 wheel drive not working and only getting 750 psi from the test ports to the rear tires. Main pump was just rebuilt.
  9. keith@cooglerconstruction

    Hitachi ZX270LC-3 error codes

    Can anyone tell me the meaning for code 10022-4 on a Hitachi Excavator please?
  10. keith@cooglerconstruction

    BOMAG MPH600

    I have a Bomag MPH 600 with some codes travel speed is badly reduced when roller in turning looking for a code chart and description for those codes. If anyone could help that would be great. Bomag MPH600 Serial # 101590301055 Codes Showing: 9105, 9114, 13340, 13360, 3330
  11. keith@cooglerconstruction

    Relay, fuse locations and wiring diagram for Injector Circuit

    1995 International 9200 Water Truck Vin # 2HSFMAHR4SC012595 This truck has no power to fire the injectors and the cover for the fuse and relay box is missing for the location of the relays and fuses. Truck is too old for Diesel Repair to give me any information. If anyone could help that would...
  12. keith@cooglerconstruction

    259D Cat skid steer

    Yes .2 Volts less than the battery power. with the key on Battery Voltage drops to 11.8 volts. with key off battery is at 12.4 volts
  13. keith@cooglerconstruction

    259D Cat skid steer

    12.4 volts
  14. keith@cooglerconstruction

    259D Cat skid steer

    Thanks for the diagrams
  15. keith@cooglerconstruction

    259D Cat skid steer

    Low system voltage check alternator and battery message showing on the screen. Both have been checked and battery replaced
  16. keith@cooglerconstruction

    259D Cat skid steer

    Looking for a wiring diagram for the charging system, machine will not charge had alternator checked and was told it was ok and replaced with a new battery and cleaned all cables still not charging correctly. Serial No. FTL12008
  17. keith@cooglerconstruction

    D6N will not turn left

    Yes it was one of the hoses that came off the valve for steering. In that case how can the air be removed.
  18. keith@cooglerconstruction

    D6N will not turn left

    No service light staying on and it happened all at once. we replaced a hydraulic line that was leaking filled it back up with hydraulic fluid and the problem started.
  19. keith@cooglerconstruction

    D6N will not turn left

    Serial # DJY00981 and differential steer
  20. keith@cooglerconstruction

    D6N will not turn left

    I have a D6N that will not turn left or right. It will steer right in reverse and machine will move forward and backward.
Top