• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

help

  1. B

    JD 444D Brake Question

    Hey guys, I'm back again. I got the loader moving (thanks to you guys)...but now she won't stop. John Deere 444D Serial DW444DB509098 TM-1341 is the repair manual PC2059 is the parts catalog Loader brakes, which previously worked before new hydraulic pump, new brake pump, etc. do not work now...
    • beauganas
    • Thread
    • 444d brake issues help john deere 444d no brakes south carolina
    • Replies: 5
    • Forum: Wheel Loaders
  2. D

    Mini ex paired with TLB?

    Hi guys, I recently picked up a John Deere 30g mini ex. I’ve been doing some jobs that require some grading and I find it difficult to get the grade perfect without small subtle bumps. I do own a Kubota BX24. It was my first piece. I don’t currently have the funds to go buy a skid steer for the...
  3. B

    JD 444D Transmission Question

    Hey guys, I'm a newbie here needing some help. John Deere 444D Serial DW444DB509098 Loader will not go into gear. Transmission pressure gauge won't register, doesn't budge on startup. I can shift loader into R-N-L, I feel the detents on the shifter, yet no engagement/drive. Trans Oil is...
    • beauganas
    • Thread
    • 444d help john deere 444d south carolina transmission wheel loader newbie
    • Replies: 9
    • Forum: Wheel Loaders
  4. L

    1978 international TD7E -- Hydraulic Oil Leak HELP

    Hi there, new to the forum. :) I have a 1978 International TD7E series and it's leaking hydraulic oil between the engine and transmission below the transmission. Does anyone know if it needs a seal between the transmission pump and the torque converter, and does it need a bearing on the pump...
  5. FaktorII

    2016 Case excavator cx80c tracking problem

    I’ve got a problem that keeps showing up with my tracks. Machine won’t turn when both sticks engaged. Each side works fine by its self but as soon as I try to turn slow and engage second side tracks just almost stop. If I engage both tracks straight or back all the way it will track forward or...
    • FaktorII
    • Thread
    • case case cx80 cat excavator help kobelco kubota problem tracks
    • Replies: 5
    • Forum: Excavators
  6. T

    We rebuild sprockets

    Message me if you need a sprocket built back up do to parts no longer available such as the New Holland DC70. Simply ship sprockets, we weld them and hard surface them and ship them back. Or price varies depending on how badly worn they are as it will directly affect the amount of materials used...
    • TriStarFab
    • Thread
    • help rebuilt repair sprockets
    • Replies: 1
    • Forum: Dozers
  7. M

    Does anyone know ? LULL

    Hello I'm from Poland What can you tell me with these LULLs?I can't find a photo of this on the internet :( I'm looking for parts
  8. S

    New Holland LB110B Stabilizer arms and Extendahoe stopped working

    Greetings! English is not my first language so i apologize in advance. Basically as a title states, before that stabilizer arms would sometimes work sometimes would work really slow, never fixed them because i couldnt find the problem, now they stopped working completely. Its a Backhoe loader...
  9. N

    Unidentifiable Electrical Plug

    I have 93 jcb sitemaster serial pe410022 with the perkins ab turbo motor, and have recently torn off the head for what was thought to be a blown head gasket. But when reinstalling new parts and putting it back together I noticed a plug that I had forgotten. The numbers for the wires are 600CF...
  10. Tom Sticpewich

    Help! Can anyone identify this forklift??

    It’s a Komatsu as you can see but it has no model number or ID plates , can anyone identify if for me or the engine?
  11. Bad billy

    Ex75ur final drive problems

    Blew my cone seal on my final drive .Is there an inline filter on the return lines?put another drive in and the same thing happened after 30 minutes ,so I have problem of the drive not releasing the pressure.Has any one have any input?Need to find hydraulic schematics on the Hitachi ex75ur ?Any...
    • Bad billy
    • Thread
    • final drives help hitachi hydraulic
    • Replies: 2
    • Forum: Excavators
  12. R

    Neuson 1902 force (old) offset boom failure.

    Hi everyone ! Hoping somebody can help . I have an old Neuson force 1902. She is very old but used on small holding. My offset boom won’t work either way. Annoyingly it’s turned to the left and the usual process of Knocking switch across and using foot pedal now does not work. I can hear the...
  13. C

    Cat 12h no gear, not moving

    Can place unit in any desired gear and it won’t budge. Have codes for trans selector lever and then another for Tran indicator light open circuit. The selector code is stored until activated then I get an active code. I’m guessing it’s the selector lever but needing some reassuring.
  14. S

    Zx135us-3

    Machine runs fine but doesn’t have any power to dig.if you pull the blade up and hold blade handle back then has all the power to dig. Any idea where to start looking? It tracks fine without blade handle pulled back Thank you in advance
  15. G

    Needing advice for cutting in new access track up a slope

    G'day everyone! Really appreciate everyone's time and experience here in reading and replying to my 'essay' below... I tried looking and using searchwords here on the forums to find some already shared guidance, but none found yet that can give a clear indication on what's best practice for my...
    • Guy: CAT-308E2
    • Thread
    • access track advice cutting in grading help hill how to slope
    • Replies: 40
    • Forum: Excavators
  16. F

    Hitachi Ex350H-5 getting coolant in oil

    Hi everyone, this is my first time posting. I'm a young farmer up in northern Alberta. I am not the most mechanically minded person but I try to do any mechanicing I can before hiring someone. This excavator was my first heavy equipment purchase. I bought it last year and I plan on using it to...
    • FarmerToby
    • Thread
    • coolant in oil ex350 ex350h-5 excavator help hitachi john deere troubleshooting water pump
    • Replies: 5
    • Forum: Excavators
  17. MelvinH

    2004 Case CX160 Excavator Service Repair Manual

    Hi, Just recently purchased a 2004 Case cx160 excavator and i'm going to try to revive it. Does anyone know how I can find a service manual for this machine? I've tried googling but i'm in over my head at 61 years old. -Mel
    • MelvinH
    • Thread
    • 2004 case cx160 cx160 help question
    • Replies: 8
    • Forum: Excavators
  18. S

    Kubota K008-3 Help!

    Kubota K008-3, 2012 mini excavator started having arm movement issue without cause. Everything works well except right hand forward (Main Boom down). No power there. Barely moves now. What should I be looking at?
  19. M

    Nissan Hanix S&B 30

    I have a sb30 im trying to get back going. i found some hydraulic schematics on the forum and some brochures. anyone have a manual or engine info. I cannot find any markings on the engine for make/model and need a starter in a bad way. local shops cant seem to find a starter or parts to rebuild...
    • mtBandit
    • Thread
    • hanix help manual nissan sb30 service
    • Replies: 5
    • Forum: Excavators
  20. B

    Case 1835c blowing smoke when idle is raised runs rough please helppp

    So I have this case 1835C with a continental TMD20. 3 cylinder diesel I was using it for about two hours when all of the sudden I saw a lot of black smoke coming out of the tailpipe I checked the fuel I replaced the air filters and the fuel filters still doing the same thing I bought new...
Top