• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

case

  1. L

    Case Rock truck 340 stuck in park

    Hi Guys, Haven't posted much here but long time viewer. My 2008 Case 340 rock truck wont come out of park. When we disengage the parking break it acts as its still on and wont move. Has anyone experienced this before, yesterday after fooling around with the battery terminal and air release we...
  2. Vincent n

    Case 580b gear oil in powershuttle

    I just purchased a 1974 case 580b with the diesel motor and the powershuttle transmission. was told buy the owner that they had rebuilt the powershuttle and it would not move, so i go it home and soon realized that the powershuttle was full of gear oil and mixed with water probly from it sitting...
  3. W

    Case 580SE having hydraulic fluid changing problems

    Got a friend with a Case 580 Super E and the hydraulics worked fine til he changed the fluid and filter, now he has no hydraulics. He has pressurized the hydraulic tank and bled all lines and has slight movement in hydraulics. Any possible solutions or ideas would be appreciated.
  4. K

    680E Cummins swap

    I just purchased a very clean Case 680E with a broken connecting rod (punched a hole through the block). It seems these 336BD engines are the trifecta of being unreliable, rare, and expensive. It looks like the newer 680K uses the Cummins 6BT, so I'm wondering the feasibility of an engine swap...
  5. J

    Rebuilding Power Shuttle on Case 580se Backhoe

    i have recently purchased a Case 580se Backhoe that would barely move forward. Reverse was fine. After researching and doing pressure tests it became apparent that the Shuttle needed rebuilding. Pulled it apart and the Forward Disks looked pretty bad. I bought a complete rebuild kit, gaskets...
  6. Jake Erickson

    821 CASE BRAKE QUESTIONS

    SERIAL #JAK0023963 I've been looking for a payloader. Found one nearby very low hours, never worked in heavy construction. Pushed a train for it's entire life. It's going on auction. The people listing it said the brakes are bad. I called the mechanic shop and they said $17,000 in parts or...
  7. D

    possible case 580 super m bad hydraulic pump?!?

    I bought the backhoe with weak dipper movement, especially cold. I changed fluid and filter with still no change. Someone told me there could possibly be a suction screen so i took an air hose and blew into the fluid for the possible screen with hopes to maybe knock some crud (if theres even a...
  8. J

    Case 621 loader

    I’ve just bought a 621 loader. According to the guy I purchased it from, he just had the transmission rebuilt but it doesn’t have fourth gear. He told me it was a solenoid but I’ve done an ohm’s test on all of them and they seem to be working. My next step is the check the pressures. Anyone have...
  9. Z

    1845c Sprocket Shaft Bearit

    I need to replace the needle bearings in the sprocket on the right side sode of the machine, sprocket moves back and forth. I'm guessing I need to loosen the chains pull the shaft and then work the sprocket out one of the access holes. I guessing 5 hours to do it. Thoughts or suggestions? (Asked...
  10. P

    Case 621b

    Hello, I am new to the forums but I read them religiously. I figured why not join maybe talk out a few issues I have with you guys before spending the big bucks on case mechanics to come out. I have a small fleet of loaders what we use for snow plowing only. We do not use them for anything...
  11. P

    Case 580C shuttle shift loose

    Hello everyone, Brand new here and new to heavy equipment. I bought a Case 580C backhoe a few months ago. Already had to pull two cylinders to get repacked and fix the right brake (actuating lever broke) so I am becoming familiar with it. Next thing I want to try to tackle is the shuttle shift...
  12. K

    Problems-New Holland D75 WT Dozer

    Having problems with a 2006 New Holland D75 WT. It will start and run ok for a few minutes. Then, when it starts warming up, it goes into some sort of limp mode. It won't push dirt. The instrument cluster displays the red mechanical gear looking symbol. The fault codes from the cluster are...
    • Kaskin
    • Thread
    • case limp mode new holland 750
    • Replies: 11
    • Forum: Dozers
  13. C

    Case/Isuzu common rail issues

    Hi guys, The machine is a Case CX130B(BAC130K5N8SAD1114) with a 4JJ1X Isuzu engine. It's starting, running briefly and then shutting down again at low idle but runs at high idle so when no functions are used it shuts down. I've been to it before when it was only intermittent and found really...
  14. C

    Case 1845c Planetary Gear size

    Hi guys. i recently bought a case 1845C brown cab with the planetary gears for the wheel motors. The right side carrier had lack of oil it looks darker than the other side, and the bearings in the 3 gears of the carrier are shot. Well i happened to pick up a new planetary carrier. The numbers...
  15. Garageguy

    1973 case 580b ck

    I just got the Backhoe not too long ago it didn’t move at all the fluid in the torque converter looked like strawberry milk I cleaned it all out by flushing it multiple times and putting new fluid in even change the filter now what it is doing is when I start it up when it’s cold it moves fine...
  16. S

    Case TR310 no throttle response

    Case TR310 Believe it's a 2016 year S/n; NGM415547 No throttle response, will only idle. No codes that I can find? Not 100% how to pull the codes on this screen. All the fuses are good, no hot relays, swapped around relays just to be sure, nothing corroded in fuse/relay box. Power going to...
    • Slim Tech
    • Thread
    • case high idle low idle no response no throttle response skidsteer throttle control tr310
    • Replies: 1
    • Forum: Skid Steers
  17. Troy4500Industrial

    1974 Case 580B Oil Pressure Gauge

    Hey All, I don't have an oil pressure gauge on the tractor, I'd like to have one tho! Not sure if it had one originally or not, these pics are from the block up by the fuel filters ... can anyone tell me what they are? One is a wire that comes up and goes into the harness and the other is a...
  18. Chris Hyde

    Case w18 Brake Release to Load on a Trailer

    I am trying to load up and move a Case W18 wheel loader that does not run. Is there an easy method to release the air / hydraulic brakes ? Compressor was removed and air lines are missing.
  19. Bradly Chisholm

    Case 1845 Sprocket Cluster

    Hello all, I have a Case 1845 and I was wondering if someone out there had some info to share with me regarding drive chain adjustment on the Sprocket Cluster? I know the wheel adjustments, just not the one in the middle. Thanks in advance, Brad
  20. J

    Wheels on one side not moving - 1970 CASE 1740

    Hi all, we have a 1970 Case 1740 skidsteer which up until last year worked fine with only minimal issues. This was purchased a while back by my husband in very used condition but since we use it for lighter stuff it fit our needs perfectly. Last year someone borrowed it and returned it broken...
Top