• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

deere

  1. Nathan Craig

    John Deere 350D Haul Truck. Only one wheel pulls the truck.

    I run a 350D truck in a rock quarry, and here recently we discovered only one wheel pulls the whole time. What would cause this? It got hung up the other day and even locked in only 1 wheel spun.
  2. E

    Deere 240 2000 model blows accessories fuse with key OFF

    I have a Deere 240 skid steer around 2000 model that blows a 25 amp F1 Accessories fuse as soon as it is inserted. The machine runs fine but does not charge, no lights, etc. because of the fuse. I have tested the relay for resistance, and swapped it for another one. No change. Relay seems good...
  3. Sharkproof

    Case 1845c Skid Steer Ripoff?

    I recently bought an 1845c at auction based on video, pictures and it's reputation as being "bulletproof". The seller disclosed a hydraulic leak, but claimed unit was operating properly. (I did notice after the fact, that in the video demo the driver only made left turns). Well it turns out...
    • Sharkproof
    • Thread
    • 1835 1840 1845c bobcat case deere gehl skid loader skid steer
    • Replies: 28
    • Forum: Skid Steers
  4. J

    Deere 450C transmission clutch linkage question...

    I have a Deere 450C crawler loader and it has not run in years, so a new battery and it is running fine. Went to move it and the clutch pedal linkage doesn't seem to be doing anything... I have the YUGE JD shop manual and I searched for transmission clutch adjustment and there is a tiny crappy...
  5. C

    Deere 444k dipstick tube broken

    444k loader, went to go check oil this morning before using it, the tube that is pressed into the block seemed to have snapped off nearly right flush with the block. Any recommendations or good ideas on how to get it out? Have new tube ready to go in just need good advice on getting the old one...
  6. B

    Deere 550H transmission pressure loss

    I was running my 550H in the dark and ran into a stump in 4th gear. Lost all gears and transmission gauge reads close to zero. I check underneath and didnt see any huge amounts of oil leaking out, but it was dark and I had to leave for other tasks. The machine is not in a user friendly area:(...
    • Bearhead
    • Thread
    • 550h 550h drive loss deere
    • Replies: 3
    • Forum: Dozers
  7. Schilde143

    John deere 35zts guage display

    I recently bought a 2003 john deere 35zts. Runs great but the display for the hour meter and fuel guage does not work. Looking to see if anyone has one for sale.
  8. J

    1968 John Deere 544 Steering issues

    Long story short I bught and sold and re-aquired my old JD 544 wheel loader. Transmission was loosing oil pressure so tore it down and rebuilt it with the help of the manual. Thing is, it was just the brake interconnect valve not release cutoff oil pressure to the trans. After the rebuild, the...
    • James Marks
    • Thread
    • 1968 544 deer deere direction john opposite steering turns
    • Replies: 4
    • Forum: Wheel Loaders
  9. B

    Deere 310G Backhoe

    Hey guys, Having an issue with my 310G backhoe. There is hydraulic fluid getting into my rear end, which is filling up and coming out the breather vent. I replaced the three seals on the emergency brake housing, but its still acting up. After replacing the seals, I put fresh fluid in the rear...
  10. S

    Deere 160D Fan Not Engaging

    Engine is overheating because hydraulicly driven fan is not cutting in. Replaced the fan drive motor already, anything else to look for? I'm assuming something electrical. Machine is a 2008 Deere 160D 10k hours. Thanks Guys!
  11. D

    MINI EX COMPARISON

    I am having a hard time deciding on a unit for purchase. Deere 60G (2015 $60k, 1500 hours), Cat 305.5 (2015 $73k, 900 hrs), Takeuchi 250 (2013 $43k, 1400 hrs) and few others in between. What should I consider that maybe I havent thought of! I have not operated a Deere mini on a jobsite but it...
    • DUNNER989
    • Thread
    • cat deere excavators kubota miniex takeuchi
    • Replies: 14
    • Forum: Excavators
  12. C

    Deere 450CLC timing issues.

    Hello everyone, hope your well. Not often that I use a forums for help, hate wasting the time of others on my problems. But it's becoming desperado at this point and I could definitely use the help of this all knowing community. The machine in question is deere 450clc with their all...
  13. F

    Deere 750B cab swap

    Working on a Deere 750B dozer and we will be swapping from an OROPS to an enclosed cab right away here. Was wondering if anybody had one around and could take some measurements for me? I have a complete cab to install however the ROPS I have isn’t set up for a cab with the 4 bushing mounts. I’ll...
  14. snowexcavation

    Earthmoving Job, Deere Pull pans?

    I’m a young kid own a small earthmoving business, got a small subdivision and need to strip 8000 yards of topsoil. Ran Four scenarios; Truck and hoe, Cat and can, paddle wheel and blade and Deere 9570 with pull pan. Cheapest cost based on my calcs was the Deere pull pan. I’m looking for some...
    • snowexcavation
    • Thread
    • deere haul truck paddle wheel pull pan scraper stripping subdivision topsoil
    • Replies: 13
    • Forum: Scrapers
  15. R

    Deere 410c controls

    I've tried searching, but could not find the answer to my question. I recently purchased an old john deere 410c and was wondering if I could convert the wobble sticks to cat controls by switching the 4 hydraulic hoses to the boom and stick?
  16. Farms7319824

    Finding the right slope board for a John Deere 450G standard width

    This (above) is a photo off of our old slope board. We would like to find a replacement but searching the numbers reveals nothing. We don't know where it came from. Here is the Identification Number of our Dozer. What is the cheapest and most efficient way of getting a slope board up...
    • Farms7319824
    • Thread
    • 450g addons deere dozer parts slopeboard
    • Replies: 9
    • Forum: Dozers
  17. C

    544J Monitor Issues

    Hi guys, new member here. figured id post a question about my 544J loader. machine has around 24,500hrs on her, just recently (the last year or so) ive been having issues with the LCD monitor, would start the loader and it would run good, shift good, but after 5 minutes the screen would flash...
  18. J

    762a transmission shifter bypass

    I have a 762a. Has anyone figured out a way to bypass the shifter switch AT105927 ( the part that Can not be found) or a way to set the shifter up on toggles or a rotary switch? Don’t want to scrap this machine.
    • Jacky1
    • Thread
    • 762a 762b at105927 deere johndeere scraper shifter switch transmission transmission controller
    • Replies: 8
    • Forum: Scrapers
  19. O

    Your Ideal Set-Up for Swimming Pool Excavation and Demo

    Hey Guys, I have been sniffing through the forums for years and found a ton of useful information but this is my first post. We are pool contractors in Central California and have been throwing the idea around of purchasing a CTL and Mini/Midi as the business has grown it seems like a good...
  20. A

    Deere 850k Blade not working- HELP

    Hey, I want to run something by you about our Deere 850k we’re having a problem with. 3 months ago we had an error code come up saying “height spool positioning error” which caused the blade fictions to kick out. Originally we thought it was because of the cold, so we ran it around the site not...
    • Adam43
    • Thread
    • 850 850k blade bladenotworking bladewontlift deere dozer dozer blade dozer problems johndeere
    • Replies: 5
    • Forum: Dozers
Top