• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

skid loader

  1. S

    Bobcat 753 Lift only works with Auxiliary hydraulics engaged

    Hello, I have an old Bobcat 753 that had a stuck pedal. I took the control valve out, unstuck the spool valve, rebuilt it, and now the machine works great, except the lift only works with the Auxiliary hydraulics turned on, and the switch engaged to the right or to the left. The tilt only...
  2. F

    Catapillar 246D Code 2204-3

    Hello! I recently purchased a used 246d. We fixed a leaking hose for the auxillary hydraulics and then wanted to test it out on a mower attachment. Fired up the mower, it spun for a second and made a loud noise and then stopped. Now, the auxillary hydraulics will not work and I have the 2204-3...
    • FarmerKyle
    • Thread
    • 246d cat hydralic shut down skid loader skid steer
    • Replies: 8
    • Forum: Skid Steers
  3. W

    JCB 190T hyd. reservoir removal

    Hello. I have a JCB 190t tracked skid loader and have an oil leak I believe at the front of the hydraulic Reservoir. I have removed the mounting bolts underneath the skid loader and in the wheel well so to speak by the rear of the track. It seems to be loose but yet I cannot get it to come out...
    • Wildman5252
    • Thread
    • hydraulic leak hydraulic tank jcb skid loader track loader
    • Replies: 0
    • Forum: Skid Steers
  4. C

    Cat 289C hydraulics locking out but no code.

    help anyone. My skid steer cat 289c I hop in start it I can lift arms up but as soon as I come down on the arms it will come down a fraction then locks out the hydraulics but the lockout light doesn’t come up the air filter restriction light comes on switch it off and it all goes away until I...
  5. K

    Case 445CT bucket not holding lift

    Hello, Case 445Ct loader bucket tilt will not hold position. Settling is visible by eye without a load on it. I can tilt the bucket down, lifting the front of the machine off the ground, and it holds the machine solid. That rules out the cylinders which were rebuilt a couple years ago any way...
  6. M

    Help installing wired GPS to Takeuchi TL12R

    Hello all I need help figuring out the best way to hook a gps to a Takeuchi TL12R2. I have tried hooking this up directly to the ignition switch. It would work for a while but eventually the gps wont track. I have contacted our gps seller, but they are saying more than likely is the location of...
  7. A

    2011 Case TV380

    Hey Yall, Skid steer move and run fine but when i go to release the bucket the warning light with the exclamation alarm comes on and the aux override light starts flashing and the bucket wont realize, any ideas? checked all the fuses they are good, just need the bucket to release. also i...
    • Archyboy
    • Thread
    • case case skid steer case tv 380 skid loader skid steer tv 380
    • Replies: 0
    • Forum: Skid Steers
  8. S

    2013 John Deere 329E flywheel or something in there is damaging my crank sensor.

    I removed the sensor and it was bent like something hit it and there was steel dust collected on the sensor, I scoped it , cant see much but the teeth on the flywheel are chipped up a bit. I think i need to open it up and see what's going on. I'm thinking the best way to get at it is to remove...
  9. T

    how to add a return to case line

    Hi Everyone! I'm new here and looking for some help. I recently got my first skid steer and its a 2007 case 440ct. I bought it to do some brush clearing and a few other piddly things, in any case i purchased a new top cat mulcher and it is set up for 3 line where as my machine is set up for 2...
  10. J

    331G electric issues causing def fault code

    Good morning, I’ve got a John Deer 331G skid steer. It’s throwing 5 different fault codes. It’s also saying “Def fault code, power and speed is decreased” two days ago it worked just fine. I cleaned both ground contacts by the fuse boxes. Any other ideas? It seems like it may be a ground issue...
  11. T

    JD318D Electrical Issues

    Hi all- I’m having some issues with a 2011 JD 318D. The EMU backlit display will not shut off and when I turn the key it is not running through its normal cycle and no indicator lights come up. In the past I have fixed this issue by removing the negative battery cable and jigging it on the...
    • Tk_889
    • Thread
    • 318d deere electrical emu skid loader skid steer
    • Replies: 6
    • Forum: Skid Steers
  12. H

    New Holland L553

    I am considering purchasing a L553 loader with 6700hrs. Seller says boom lift and tilt are not functioning properly, the machine will only run in service mode. I don’t have a manual for this, would someone be able to send me a link to one? Or else point me to where I should be looking for the...
    • Hogguy1
    • Thread
    • boom lift not working l553 new holland skid loader
    • Replies: 0
    • Forum: Skid Steers
  13. P

    ASV PT100 injector pump leak??

    Hi all, doing a bit of road work with dozer blade, engine started to run a bit rough, parked it up, noticed a diesel leak. Seems to be from the engine side of injector. Have posted a few photos, did have a video but can’t upload hopefully someone has an idea why and how to rectify. really...
    • paul croxson
    • Thread
    • asv diesel leak fuel injector leak injector leak leaking injector pump pt100 skid loader skid steer
    • Replies: 10
    • Forum: Skid Steers
  14. B

    Kubota SVL 90-2 Error Codes, wiring issue?

    Hey guys, i have an SVL90-2 throwing multiple codes, E-9100, E-9102, E-9107, E-9109 I contacted the local dealer, and the "technical support" thought its probably a wiring issue but weren"t able to point me in any direction of where to look. I looked over the wiring that i could see without...
    • Bradley Martin
    • Thread
    • 90-2 error codes fault codes kubota skid loader skid steer svl svl90-2 wiring
    • Replies: 2
    • Forum: Skid Steers
  15. C

    CAT 277C No Right Stick Controls - Driver Warning Light Flashing, no Alarm (USMC Equipment)

    Trying to diagnose a Marine Corps skid loader. Driving controls work, bucket controls (right stick) do not, and tool controls (auxiliary controls) seem to work. The driver warning light is flashing, there is no alarm/buzzer. The battalion has a CAT computer but it's out of date so we can't read...
  16. Sharkproof

    Case 1845c Skid Steer Ripoff?

    I recently bought an 1845c at auction based on video, pictures and it's reputation as being "bulletproof". The seller disclosed a hydraulic leak, but claimed unit was operating properly. (I did notice after the fact, that in the video demo the driver only made left turns). Well it turns out...
    • Sharkproof
    • Thread
    • 1835 1840 1845c bobcat case deere gehl skid loader skid steer
    • Replies: 28
    • Forum: Skid Steers
  17. D

    Case 90xt

    My case 90xt lifts great at an idle when cold, when it gets warm it doesn't want to raise unless ½ or ¾ throttle even then very slow where do I start?
  18. DaveSh

    Help to identify my Skid Steer

    I recently bought an old Skid steer to use on my acreage. It works well enough and the price was right. But I'd like to know what it is. I have scoured the internet and I "think" it is a Massey Ferguson? But I have no idea. And it's not exactly like the pictures I found online. Can anyone...
    • DaveSh
    • Thread
    • bobcat case massey ferguson skid loader skid steer
    • Replies: 10
    • Forum: Skid Steers
  19. G

    Caterpillar 226B drive joystick testing

    Hey, my machine is a 2008 with 2700hrs. The left joystick is very slow to react and also overreacts. The right joystick is perfect and works like a charm. Both have very slight external sweating, but nothing I would consider a “leak” From forward to reverse or reverse to forward, it has a full...
    • GarrettJ
    • Thread
    • 226b cat caterpillar control hydraulic joystick pilot procedure skid loader testing
    • Replies: 11
    • Forum: Skid Steers
  20. W

    Help 2011 case tv380 no start

    I’m new to case so advice will help. The machine has been awesome no issues. This morning I started it an cranked more than usual. Then once started I had to idle high to keep it running. If you try idle it down it will miss an die. Now the machine will not start. There is no codes! I’ve been...
Top