• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

case

  1. A

    2011 Case TV380

    Hey Yall, Skid steer move and run fine but when i go to release the bucket the warning light with the exclamation alarm comes on and the aux override light starts flashing and the bucket wont realize, any ideas? checked all the fuses they are good, just need the bucket to release. also i...
  2. V

    Case 125b Wont move or swing

    Hi everyone, I'm Hodge I found your forum trying to fix my excavator and saw lots of knowledge and people helping each other and thought y'all might be a good place to see if someone here might have an idea on whats going on with my machine. little back story.... I bought this machine to start...
  3. K

    Skid steer or payloader for Topsoil screening machine

    New here and I'm sure it's been asked before but im trying to figure out if I need to look for a smaller payloader or keep with my bigger skid steer to use with my screening machine it runs about 30yd per hr of cleaned dirt. Right now we are running it with my case 95xt and a pc50 mr2. The...
  4. A

    Case 621C Brakes issues.

    I just recently bought a case 621C. Little over 4000 hours. It barely has any brakes. It is hydraulic brakes with discs in the hub. I noticed that they have a hydraulic brake line going to the front axle blocked off and a couple plugs unplugged. the rear axle is filling with hydraulic fluid and...
  5. I

    Case 580B - No Start

    Hi all, I’ve got an old Case 580B with the G188d engine that came with my property, the previous owner said it used to run so I’ve been working through getting it back to work. I changed the oil & filters and required her and finally have her cranking but I can’t get her to run on her own...
  6. R

    Case CX240B Fault Code !7204

    2007 Case CX240B. Machine blew a hydraulic hose right off of the hydraulic pump. Got a new hose and washed everything down to get rid of the oil mess. Afterwards, the machine started throwing a !7204 code on the display. Power save solenoid disconnected or short. But we continued to run it...
  7. R

    Case 60XT skid steer - hydraulic fluid

    The hydraulic fluid on my Case 60XT skid steer is low and I need to add some hydraulic fluid to the reservoir. When I look at the specifications for this skid steer it says to use SAE 10W30 oil...isn't this "automotive oil" and not hydraulic fluid??? On all of my heavy equipment I've always...
  8. S

    Case 580k Phase I Transaxle Oil Options

    Hi everyone, I bought an old 1987 Case 580K (Phase I) and I'm looking for help identifying all compatible transaxle fluids. The service manual calls for 20.5 quarts of Case Transaxle Fluid (MS 1317). The only thing I've been able to find from Case which appears to be what I need is their...
  9. A

    CASE 9250 electric powershift problems

    Have a 1994 case 9250 articulated tractor, that will go forwards and backwards but won’t select any gears apart from first. Have replaced gear selector and one solenoid on valve bank, chased wire loom - no faults. Any recommendations would be appreciated.
  10. Eldridge Construction

    1.75'' hitch pin

    What the heck do you call the pin on a backhoe that stops the boom from moving side to side. I wanted to find a replacement for my 580K and I can't for the life of me find what case uses in the hole.
  11. Shahidsolangi49

    Case WX165 does not perform swing function at all

    Hi all! I am working on a machine from case (wx165). Machine has left to perform swing at all also sometimes other functions like boom, bucket and arm also do problems. I need electrical diagram and location of its solenoid valves . Anyone having knowledge please help me. Suggestions will be...
  12. D

    Case 580C Won’t Start Help

    Hello, Having a regular issue where I get a click of the starter and then no start on the Case 580C. Brand new battery with good voltage. After the single click I get no click of the starter when I try to turn the key, I have to disconnect the positive terminal then usually reconnect it and the...
  13. J

    Old Case 850 Blade Pin

    Hey everyone, new to the dozer world. Can someone point me in the right direction to where you can pick up a pin for the blade? Also looking to where to find the tapered pin that locks them in. Thanks In advance
  14. M

    Case 580B missing parts from main relief valve.

    Hi, First post here. I have a Case 580B and the main relief valve for the loader control is missing parts. I spoke with Case, and they said they no longer make those parts. My question is: Is it possible to add a remote to the loader control valve and if so, would it matter if the main relief...
  15. H

    JCB JS130 CAPS function for throttle reset - won't complete cycle

    Hello everyone, I've got a JCB JS130 excavator. Very similar to a case 9010B or linkbelt. Had some hydraulic pressure issues and decided to make sure I was getting full engine RPMs before I messed with the hydraulics too much. My local JCB dealer send me instructions on hot to reset the...
  16. D

    580 Super L Transmission won’t shift F or R

    Serial JJG0191450 First off, not much of a mechanic, so bear with me. I will probably have to look up how to do anything suggested. Problem presented as you needed to slightly rev the engine a hair for it to engage and would move fine then. Restarted unit a few times, no change, drove it back...
  17. D

    Lost Forward on Case 580C!

    Hey Guys, Lost forward on my Case 580C from stopped! (reverse works great) Did all the maintenance on my new to me Case 580C. (gear oil, engine oil, fuel, power shuttle, all filters,) When I changed the power shuttle fluid I noted some contamination with a 1/2 pint of grey hydraulic oil, some...
  18. D

    07 case cx160 slow bucket,stick,LH track help

    I’ve got an 07 case cx160, had the bucket cylinder rebuilt. Put it back on and now the bucket close the stick and the LH track are slow as molasses. Any help/advice would be appreciated. Thanks
  19. FaktorII

    2016 Case excavator cx80c tracking problem

    I’ve got a problem that keeps showing up with my tracks. Machine won’t turn when both sticks engaged. Each side works fine by its self but as soon as I try to turn slow and engage second side tracks just almost stop. If I engage both tracks straight or back all the way it will track forward or...
  20. D

    Help Needed: Case 580C Won’t Crank

    Hello Friends, Was out running the Case 580C yesterday and after taking a break I got one click of the starter then no crank thereafter. Had good battery voltage and fuel. Noted the power wire circled in the attached picture to the starter has a break in the casing. After playing with the...
Top