Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page.
We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy.
Thank you!
Hey Guys,
Been looking online, in the manual, etc and I cant find an answer to what I'm looking for. It appears the tracks on my dozer are starting to "veer" out and I'm losing my good tracking. I've looked and looked on how to, if possible, re-align the rails/idlers. Anyone on here have any...
Going to look at a Cat D4D 3304 engine, power shift, 6 way, angle is manual, winch. With from pictures would say 60-70% under carriage. Has input seal leaking on trans. What would be a fair offer on something like that?
Thanks Cory
Does anyone out there turn their own track bushings? Or am I the only one crazy enough to want to do so? If anyone does so I would love to know what set up is being used and where it was bought, or how it was built. I have been scanning the web and haven’t stumbled across anything yet.
I just picked up a CAT D6C that has a c-frame style blade with no hydraulic tilt. the machine used to have a different blade with the hydraulic tilt cylinder. the hydraulic ports on my machine are currently capped.
questions:
1. can you mount a single hydraulic cylinder on this style blade or...
Just took ownership of a 1986 Cat D5H XL. Serial number 8RC. I can’t seem to find much information on the internet about this machine let alone a operator or service/parts manual. Even parts.cat.com doesn’t seem to work for this machine. Too old maybe? Just wondering if anyone has any...
Does anyone out there know if it is possible to physically connect a CAT627B scraper (motor converted to direct pull) to any part of the ripper on my CAT D8H? I am getting rid if the front tractors on my two scrapers (with dead engines) and would like to pull behind my D8H.
Thanks!
Mustafa
Since I bought my machine I was in doubt if there was any problem with the engine, thermostatic valve, as it always rose in temperature. So I changed the thermostatic valve, washed the radiator, checked the radiator helix belt, nothing worked. So I put the device on and forced the machine for 2...
Hello everyone, I recently acquired this machine and it was flooded in hurricane Ida, machine is back up and running but I am having major difficulties finding part # and diagrams. I also truthfully cant afford to buy a service manual for her at the moment. If anyone has a copy they are willing...
Have some D9T dozers for sale. DM me for more information.
2008 Cat D9T (18,772 Hours - rebuild in 2016 at 7,000 Hours)
2011 Cat D9T (19,480 Hours - rebuild in 2016 at 8,600 Hours)
2011 Cat D9T (19,603 Hours - rebuild in 2016 at 9,100 Hours)
Happy to provide more information, inspection...
I have a 2004 650H LGP Dozer and I have a lot of codes showing up, I tried to look for it but was unable to find in the web
120F
144F
145F
109F
131F
121F
Where can I find these codes?
Hello everyone! I bought a D4C LGP and I’m having issues with the blade . When I use the blade lever in full motion sometimes the blade will function very slowly . When it does that I bring the lever back to neutral position and then I go half way and the blade operates quick as it should . This...
Hi I'm new to this and have an opportunity to purchase a D5K dozer from a rancher and wanted to see if anyone could help and get the options that are included on this dozer.
Any help would be appreciated
Thanks
I clean out several ponds a year and I am curious if anyone has used a large tractor and scraper set up to scrape the muck out instead of pushing all that slop with a dozer. Some feedback would be appreciated!
Hi,
I have a long list of Serial Numbers for our earthmoving machines and wondered if CAT use a specific way of determining a VIN/PIN number?
We have sites Australia wide - so wondering if I can figure this out myself before sending lots of emails asking our site fitters to send me photos of the...
Serial cfc00589 d3g xl
My d3g has recently had an issue with one of the segments coming off and hanging up the Rh track. Once I got that issue resolved, it has now stopped tracking properly. It will track a foot forward and the same in reverse. I busted the chains apart and lifted the machine...
Hello All,
I have a IH 500E I picked up, I know not necessarily the greatest piece of equipment in relation to getting parts. I'll be needing a new set of tracks, but I found a place in Wisconsin to make those. That's not the issue, what I'm wondering is the tracks I have on now, one side is...
Rebuilt/sealed all four ripper cylinders, adjusted the linkage that the (4 way) accessory lever attaches to, and flushed all of the oil, tank included with SAE 10 cat equivalent. Now the ripper droops and needs to be lifted every other minute. Im leaning more toward oil or linkage. The cylinder...
hello all,
I'm working on a Cat D4C Series II with serial 7KG0. I'm looking for a service manual and was hoping someone here could help me find one. I can find lots with 7KG1 are they close to the same thing or should i keep looking.
Looking to buy a medium sized dozer for mostly forestry work and some grading of existing roads. Not much stump removal, mostly clearing skid roads, skidding logs, grading gravel roads after the heavy equipment chews them up.
Was pretty far down the road on a D6C or D (or maybe an H) - my...