• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

final drive

  1. J

    Final drive for Kobelco SK03

    New Dyco Final drive $ 1200 Fits Kobelco SK03/K903 Model # 2441U532F1 Serial # 8912 Located Pearland, TX 77581 Cash, you pick up. Phone number corrected Can text me at 512-595-6144
  2. J

    tm07 gm07 final drive travel motor

    Final drive travel motors for a volvo ec55; doosan dh-50, dh-60, dh-70; hyundai rc55, rc60. May fit others in this weight class, such as Sany and Kobelco. Dimensions drawing attached. One motor was unpackaged and found to be the wrong size. The other was never opened. Asking $1200/each, or...
  3. J

    FIAT ALLIS FL14B driving on one side only

    Hello all, searching for some help narrowing down a steering/ drive issue with fiat allis fl14b loader. The issue is the left track works flawless, drive,clutch,brake. The right track has no drive at all, brake works fine. So here's what I have done, taken the clutch valve body completely apart...
  4. J

    Teijin Seiki final drive manual/parts diagram

    Can anyone provide a parts diagram for a teijin seiki final drive? Model number GM07VL-C-21/37-2. Thanks, John
  5. K

    Help removing final drive cover on John Deere 333g

    Would like to know how to remove the final drive cover on my john deere 333g. I am replacing the snap rings and seals. I believe I need to apply force on the cover in order to spin and unlock it but I don't want to ruin it. Thanks!
  6. J

    Final drive... rebuild or replace?

    Howdy, I'm slowly rebuilding my ihi 55j2 excavator. Bought it awhile ago, finally got a new/used isuzu 4jb1 dropped in to replace the 4ja1, and had many of the pin bores line bored and rebushed. One of the last big deals is the left side final drive. Didn't have any plugs on it, therefore no...
  7. G

    John Deere 35d drive motor

    I replaced a John Deere mini excavator drive motor, the old one was ate up, but after it runs for 1-2 hours it loses power and won’t move unless you lift up the track, almost like as it locks up. But once it cools it’s good again. Since the aftermarket final drive comes with 1 year warranty I...
  8. R

    TL130 final drive issues...

    Hi guys. I have bought a Takeuchi TL130. She's a bit beat up and I noticed gear oil leaking on the tracks, so I took the final drive out and gave it to a friend of a friend to fix. Floating seals and bearing cost a few thousand and it took a few months to source them but got it all back...
  9. H

    Final Drive Motor on One Side Bogging Down Engine - Cat 304cr

    I just replaced both final drives on this machine. It solved my issue on one side (caused by a failed final drive) but I'm still having a problem with the other side. Basically, when I engage the final drive on that side, the engine bogs down and the hydraulic pump whines like it's under...
  10. Bad billy

    Hitachi ex75ur return filter

    Is there a drain filter at the final drive o the ex75ur?
  11. L

    Kobelco SK30SR travel motors problems

    Good morning all, We live on an acreage in Melbourne, Australia and have got an excavator Kobelco SK30SR, serial number PW07875 (1998 model). We use the machine for land clearing and general maintenance of the property. On average we only use it once a week, so, no professional jobs. The...
  12. I

    Cat 955K service questions

    I bought a Cat 955K S/N 85J3811 last year, also have PDF service manual. My questions: 1. there is an electrical problem and 2 people are needed to start the machine - 1 to adjust the throttle, and 1 to jump the starter solenoid to the battery cable terminal with a screwdriver. start switch...
  13. C

    New Holland 190b, looses power at the tracks after 1 hr.

    I have new Holland 190b. 3k hours. has several issues. 1: it never has had enough power to push up to something and spin the tracks. After about 1 hour of use, it has almost no power. it will not push into a pile of gravel and fill the bucket. running in high gear without anything in the bucket...
  14. P

    Ran Kx-91 with no oil in final drive - is it shot?

    I took a flyer and bought a very used ~2000 hour KX-91 from an estate sale that had been sitting for a while. The machine looked a bit beaten up and had bit of slack in it but overall it worked well. After I brought it home I noticed the left track seemed to be a bit weaker than the right at...
  15. J

    D3g RH final drive problem

    Serial cfc00589 d3g xl My d3g has recently had an issue with one of the segments coming off and hanging up the Rh track. Once I got that issue resolved, it has now stopped tracking properly. It will track a foot forward and the same in reverse. I busted the chains apart and lifted the machine...
  16. R

    333d Final drive rebuild

    Hello to all, I am new to this forum and new to compact tractor ownership. So I purchased a track loader 2012 333d with 1200 hrs from a auction. This machine was un drivable at the time due to busted hydraulic lines. I have since made repairs to the hydraulic lines but it seems like the drive...
  17. J

    case 450B final drive cross refrence help

    hello all i am in need of some assistance with my dozer. i have a case 450B dozer serial 306925 that is in need of a final drive on the right side. the previous owner walked the axle bearing race about 3' into the casting and i think i may be farther ahead to find a used unit. i am having...
  18. H

    Cat 301.8 final drive lifetime seal leaking

    Hello everyone, this is my first post ever here but have found lots of knowledge in these threads so since i couldn't find anything on this topic, figured I would start my own. I have here a CAT 301.8 SN: BFA06004 that has a leaking lifetime seal. I have removed the final drive from the machine...
  19. ToxicTrav117

    1996 Cat 315L final drive and swing drive oil

    What oil do you guys run in your final and swing drives? It gives me many options in the maintenance manual and not sure what to use. I live in Massachusetts so it gets fairly cold in the winter.
  20. D

    pc 50-uu-2 final drive motor seized up.

    I have a pc-50 uu-2. has two new final drive motors. yesterday I was working the machine and 1 motor seized and will not turn. acts like there is a brake holding it. any advice on where to start...
Top